RCI-2995DX 10-12 meter Base Station Radio (AM/FM/USB/LSB/CW/PA)
Designed to enhance any serious operators shack, this rack-mounted unit offers exceptional sound quality and large,
easy-to-use controls. The RCI-2995DX has features that include : AM-FM-CW-SSB modes of operation,
variable power, noise blanker and build in heavy duty AC power supply and provides 150W PeP output,
a rear panel frequency meter output for measuring transmit operating frequency and now with build in fan kit.
Dual panel meters display received signal strength transmitter power output and antenna SWR.
Clarifier audio tone controls for accurrate receiver tuning improved reception under difficult conditions.
Pushbutton selection of programming scanning functions, and programmable repeater split for FM operation
enchances the renewed 10 meter repeater activity.
The RCI-2995DX offers microprocessor-based advanced features typically found in high-end units costing several
times as much, including programmable repeater offset and receiver scanning for quick search of active frequencies.
The unit offers three methods of frequency selection, non-volatile memory to store and scan up to ten
favorite frequencies, scanning of selected frequency segment or stored frequencies and front
panel frequency selector lockout.
In addition, the RCI-2995DX offers an impressive array of design and performance improvements:
An improved receiver : designed for increased sensitivity and image rejections.
A double FET balanced mixer : for improved receiver inter-modulation rejection.
Surface mount components : for increased resistance to shock and vibration.
Features:
10 & 12 meter bands
Large frequency display with dimmer control
Improved receiver design
New green back light display
Variable output power control
Active frequency scanner
Ten programmable frequencies
Programmable repeater split
Receiver clarifier(+/- 0.5KHz)
Dual panel meters
Noise blanker/ANL circuitry
Frequency selector lockout
Continuous duty build-in AC power supply
shipping weight — 30 pounds
AM/FM/CW/SSB Base station
100W ++ PeP transmit output power
Volume, SQ, Mic gain, RF gain control
Frequency step adjust : 100Hz, 1KHz, 10KHz, 100KHz, 1000KHz, 10,000KHz
Roger Beep
SWR indicator
ANL, NB
Description
Technical Specifications :
GENERAL
Model RCI-2995 DX CF
Frequency Range : 12 meter 24.890 ~ 24.990 MHz
: 10 meter 28.000 ~ 29.699 MHz
Tuning Steps 100 Hz, 1 KHz, 10 KHz,
100 KHz, 1 MHz
Emission USB, LSB, CW, AM, FM
Frequency Control Dual Phase-lock-loop Synthesizer
Frequency Tolerance 0.01%
Frequency Stability 0.00%
Operating Temperature Range -20OC to +50OC
Microphone Plug-In (6-Pin), 400W Dynamic PTT
AC Input Voltage 100VAC ~240VAC (60Hz/50Hz)
AC Power Consumption 300W
Antenna Connectors Standard SO-239 Type
Meter Meter #1 : Indicates relative
RF Power Output/Antenna SWR
Meter #2 : Indicates Received
Signal Strength/AM Modulation
TRANSMITTER
RF Power Output 50W RMS : CW/AM/FM
150W PEP : USB/LSB
SSB Generation Dual-Balanced Modulation
AM Modulation Class B Amplitude Modulation
FM Deviation ±4KHz @ 1KHz 30mV Audio (±5KHz max.)
Clarifier Range ±5 KHz
Harmonic and Spurious Emission Better than 60 dB
AM/FM Frequency Response 400 to 5000 Hz
SSB Frequency Response 400 to 3000 Hz
Output Impedance 50 Ohms Unbalanced
Output Indicators RF Meter shows relative RF Output Power
RECEIVER
AM/CW : 0.50uV for 10dB S+N/N
Sensitivity FM : 0.25uV for 12dB S+N/N
USB/LSB : 0.15uV for 10dB S+N/N
AM/FM Selectivity 50dB at 10 KHz
SSB Selectivity 60dB at 4 KHz
Image Rejection More than 50dB
IF Rejection More than 80dB
AGC SSB/CW/AM 80 dB for 50mV for 10 dB Change in Audio Output
Squelch Adjustable-Threshold less than 0.7 uV
Audio Frequency Response 400 to 2500 Hz
Distortion Less than 10% at 2Watts Output into 8 Ohms
Adjacent Channel Rejection >50 dB
Cross Modulation >50 dB
Intermediate Frequency 10.695MHz (AM-1st, SSB), 455KHz (AM-2nd)
Clarifier Range ±5 KHz
Noise Blanker IF Single Gate Type
Audio Output Power More than 3 Watts into 8 Ohms
Built-in Speaker 8 Ohms
External Speaker (Optional) Disables Internal Speaker when connected